ISO IEC 19823-10:2020 pdf free
ISO IEC 19823-10:2020 pdf free.Information technology一Conformance test methods for security service crypto suites
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
ISO/IEC/TR 18047-3:2011, Information technology一Radio frequency identification device conformance test methods一Part 3: Test methods for air interface communications at 13,56 MHz
ISO/IEC 18047-6:2017, Information technology一Radio frequency identification device conformance test methods一Part 6: Test methods for air interface communications at 860 MHz to 960 MHz
ISO/IEC 19762, Information technology一Automatic identification and data capture (AIDC) techniques一Harmonized vocabulary
This clause describes the general test methods for ISO/IEC 29167-10. As the parts of ISO/IEC 19823 are always tested in relation with the ISO/IEC 18047 series, a duplication of information requirements and specifications should be avoided.
Clause 5 defines elements that are assumed to be covered in the respective part of the ISO/IEC 18047 series and, therefore, shall not be addressed in the ISO/IEC 19823 series. They may only be defined in the ISO/IEC 19823 series if ISO/IEC 18047 does not define them, although a revision of the respective part of the ISO/IEC 18047 series is the preferred option.
Clause 6 defines elements that are not expected to be covered by the ISO/IEC 18047 series and,therefore, shall be addressed in the respective parts of the ISO/IEC 19823 series.
“By design” means design parameters and/or theoretical analysis that ensure conformance. A vendor submitting a component or system for conformance testing shall provide the necessary technical information, in the form of a technical memorandum or similar. A test laboratory shall issue a test certificate indicating whether the technical analysis was sufficient to ensure conformance of the
component or system.
For protocol requirements that are verified by design, the method of technical analysis is at the discretion of the submitting vendor and is not specified by this document. In general, the technical analysis shall have sufficient rigor and technical depth to convince a test engineer knowledgeable of the protocol that the particular requirement has been met.ISO IEC 19823-10 pdf free.
