ISO 7637-1:2015 pdf free

ISO 7637-1:2015 pdf free.Road vehicles一Electrical disturbances from conduction and coupling
ISO 7637 is concerned with the problem of electrical transient disturbances in road vehicles and also in trailers. It deals with the emission of transients, transient transmission through electrical wiring and the potential susceptibility of electronic components to electrical transients.
The test methods and procedures, and test instrumentation and limits, given in the various parts of ISO 7637 are intended to facilitate component specification for electrical disturbance by conduction and coupling. A basis is thus provided for mutual agreement between vehicle manufacturers and component suppliers, intended to assist rather than restrict.
Immunity measurements of complete vehicles are generally able to be carried out only by the vehicle manufacturer, owing to, for example, the desire to preserve the secrecy of prototypes or a large number of different vehicle models. Therefore, for research, development, and quality control, a laboratory measuring method is used by the vehicle manufacturer and equipment suppliers to test electronic components.
These tests, specified in the different parts of ISO 7637, are called “bench tests”. The bench test methods,some of which require the use of an artificial network, will provide comparable results between laboratories. They also give a basis for the development of devices and systems and may be used during
the production phase.
Protection from potential disturbances has to be considered as a part of total vehicle validation. It is important to know the correlation between laboratory tests and vehicle.
A bench test method for the evaluation of the immunity of a device against supply or data-line transients may be performed by means of a test pulse generator; this may not cover all types of transients that can occur in a vehicle. Therefore, the test pulses described in the different parts of ISO 7637 are characteristic of typical pulses.
Certain devices are particularly susceptible to some characteristics of electrical disturbances, such as pulse repetition rate, pulse width, and time relation to other signals. A standard test, therefore,cannot apply in all cases and it is necessary for the designer of potentially susceptible equipment to anticipate the appropriate test conditions through an in-depth knowledge of the design and function of the particular equipment.
A device shall be subjected only to those tests in the relevant part of ISO 7637 which apply to that device. Only the tests necessary to replicate the use and mounting location of the device under test need be included in the test plan. This will help ensure a technically and economically optimized design for potentially susceptible components and systems. ISO 7637-1 pdf download.