ISO 6195:2013 pdf free

ISO 6195:2013 pdf free.Fluid power systems and components一Cylinder-rod wiper-ring housings in reciprocating applications
ISO 6195 specifies dimensions and tolerances of housings for wiper rings used in reciprocatingrod applications for fluid power cylinders. The range ofrod diameters is from 4 mm to 360 mm.
This International Standard is applicable to the following five housing designs.
一Type A: recessed housings with undercut or separate cover to retain elastomeric wipers.
一Type B: open recessed housings for wipers with integral rigid enforcement, that are press-fit in the housing.
一Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement).
一Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers.
一Type E: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).
These housing designs are intended for use with the wiper rings according to Figure 1.
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 883, Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole一Dimensions
ISO 3320, Fluid power systems and components一Cylinder bores and piston rod diameters一Metric series
ISO 5597, Hydraulic fluid power一Cylinders一Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
ISO 5598, Fluid power systems and components一Vocabulary
ISO 6020-1, Hydraulic fluid power一Mounting dimensions for single rod cylinders, 16 MPa (160 bar)series一Part 1: Medium series
ISO 6020-2, Hydraulic fluid power一Mounting dimensions for single rod cylinders, 16 MPa (160 bar)series一Part 2: Compact series
ISO 6020-3, Hydraulic fluid power一Mounting dimensions for single rod cylinders, 16 MPa (160 bar)series一Part 3: Compact series with bores from 250 mm to 500 mm
ISO 6022, Hydraulic fluid power一Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series
ISO 10762, Hydraulic fluid power一Cylinder mounting dimensions一10 MPa (100 bar) series.ISO 6195 pdf download.