ISO 19292:2014 pdf free
ISO 19292:2014 pdf free.Ships and marine technology一Lifesaving and fire protection一Point-type resettable flame detectors for ships
ISO 19292 specifies requirements, test methods, and performance criteria for point-type, resettable flame detectors that operate using radiation from a flame, for use in fire detection systems installed on ships. This International Standard references ISO 7240-10 for requirements common to both terrestrial and marine applications and adds the requirements applicable to installations in the shipboard environment.
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 7240-1, Fire detection and alarm systems一Part 1: General and definitions
ISO 7240-10:2012, Fire detection and alarm systems一Part 10: Point-type flame detectors
IEC 60068-2-1, Environmental testing一Part 2-1: Tests一Test A: Cold
IEC 60068-2-2, Environmental testing一Part 2-2: Tests一Test B: Dry heat
IEC 60068-2-6, Environmental testing一Part 2-6: Tests一Test Fc: Vibration (sinusoidal)
IEC 60068-2-30, Environmental testing一Part 2-30: Tests 一Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)
IEC 60068-2-52, Environmental testing一Part 2-52: Tests一Test Kb: Salt mist, cyclic (sodium, chloride solution)
IEC 61000-4-2, Ed. 1.2:2001 (b) Electromagnetic compatibility (EMC)一Part 4-2: Testing and measurement techniques一Electrostatic discharge immunity test
IEC 61000-4-4:2004, Electromagnetic compatibility (EMC) 一Part 4-4: Testing and measurement techniques一Electrical fast transient/ burst immunity test
IEC 61000-4-5:2005, Electromagnetic compatibility (EMC)一Part 4-5: Testing and measurement techniques一Surge immunity test
IEC 61000-4-6:2006， Electromagnetic compatibility (EMC) 一Part 4-6: Testing and measurement techniques一Immunity to conducted disturbances, induced by radio-frequency fields
CISPR 16-1, Specification for radio disturbance and immunity measurement apparatus and methods一Part 1-1: Radio disturbance and immunity measuring apparatus一Measuring apparatus
CISPR 16-2, Specification for radio disturbance and immunity measurement apparatus and methods一Part 2-1: Methods of measurement of disturbance and immunity一Conducted disturbance measurements
The apparatus shall comply with all of the requirements of ISO 7240-10:2012 with the exception of 5.7 to 5.17 and Annex D. In lieu of 5.7 to 5.17 of ISO 7240-10:2012, point-type flame detectors for ships shall meet the requirements of Clause 5 of this International Standard.ISO 19292 pdf free download.
