Home>ISO Standards>ISO 18890:2018 pdf free

ISO 18890:2018 pdf free

ISO 18890:2018 pdf free.Clothing – Standard method of garment measurement
Ensure that each garment or textile article is flat, in an ambient environment and without mechanical tension.
This preparation is especially important for knitted garments which should be in a “relaxed state”.When it is required by interested parties, if the garment conditioning and the garment measurements are carried out in a conditioned laboratory room, the standard atmosphere as specified in ISO 139 (i.e. 20 °C, 65 % RH) shall be used.
Lay down the garment or the textile article on the measurement surface (4.2.1), with any fasteners closed (e.g. buttons, slide fasteners, touch and close fasteners), unless otherwise stated. Place the garment or textile article as flat as possible, except the preformed garment or textile article (e.g. hat,bra cups).
Avoid any unattended folds, wrinkles and/or creases of the garment or textile article.
The area of measurement and measurement descriptions stated in this document can be used across different product types. For instance, measurements for a pair of shorts can be used for a woven formalwear short as well as a pair of cycling shorts or swimming trunks.
The area of measurement and measurement descriptions are uniquely identified by letter(s) and digit(s).Taking into account the actual garment to be measured, the combination of the selected measurements could mean different tables and figures in this document are applicable.
Depending on the garment style, measurements for different garment types or parts of different garment types could be combined, for example an all-in-one where the upper section is based on a shirt and the lower section is based on a pair of shorts.
On agreement between interested parties, measurements can refer partially or completely to those listed in the tables.
The measurement points in Table 1 and Table 2 are shown in Figure 1 (front) and Figure 2 (back) for upper garment body part with set in sleeves.
Figure 1 and Figure 2 represent examples of upper garment body parts with set in sleeves [such as short sleeves (T-shirt)], long sleeves [cardigan), long sleeves (buttoned through shirt), long sleeves (single breasted jacket)].ISO 18890 pdf free download.

Tags:

Related standards