BS ISO 8812:2016 pdf free
BS ISO 8812:2016 pdf free.Earth-moving machinery一Backhoe loaders
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 6165, Earth-moving machinery一Basic types一Identification and terms and definitions
ISO 6746-1:2003, Earth-moving machinery一Definitions of dimensions and codes一Part 1: Base machine
ISO 6746-2, Earth-moving machinery一Definitions of dimensions and codes一Part 2: Equipment and attachments
ISO 7131:2009, Earth-moving machinery一Loaders 一Terminology and commercial specifications
For the purposes of this document, the terms and definitions given in ISO 6165, ISO 6746-1, ISO 6746-2 and the following apply.
self-propelled crawler or wheeled machine having a main frame designed to carry both front-mounted equipment (3.3) and rear-mounted backhoe equipment (normally with outriggers or stabilizers)
Note 1 to entry: When used in the backhoe mode, the machine is stationary and normally digs below ground level.
Note 2 to entry: When used in the loader mode (bucket use), the machine loads through forward motion.
Note 3 to entry: A backhoe work cycle normally comprises excavating, elevating, swinging, and discharging of material. A loader work cycle normally comprises flling, elevating, transporting and discharging of material.
mass of the base machine (3.2), with equipment (3.3) and empty attachment (3.5) in the most usual configuration as specified by the manufacturer, and with the operator([75 kg), full fuel tank, and all fluid systems (i.e. hydraulic oil, transmission oil, engine oil, engine coolant) at the levels specified by the manufacturer and, when applicable, with sprinkler water tank(s) half full [SOURCE: ISO 6016:2008, 3.2.1]
Note 1 to entry: Ballast mass at delivery can be included if specified by the manufacturer.
mass of the base machine (3.2) without an operator, with the fuel level at 10 % of tank capacity or with the minimum fuel level needed for machine shipping purposes as specified by the manufacturer,whichever is higher, with all fluid systems at the levels specified by the manufacturer and with empty sprinkler tank[s), when applicable, and with or without equipment (3.3), ballast, attachment (3.5), cab,canopy, operator-protective structures, wheels and ounterweights as stated by the manufacturer [SOURCE: ISO 6016:2008, 3.2.6]
Note 1 to entry: If the manufacturer intends that the machine be partially disassembled for shipping purposes,the masses of the disassembled items shall also be stated.BS ISO 8812 pdf download.
