BS ISO 603-17:2014 pdf free
BS ISO 603-17:2014 pdf free.Bonded abrasive products – Dimensions – Spindle mounted wheels (ISO type 52)
This part of ISO 603 specifies the current shapes, nominal dimensions and limit deviations, in millimetres,of
– Type 52: Spindle mounted wheels.
These bonded abrasive products are intended to be used for hand-held grinding and manually guided or on hand-held power tools guided by hand.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 525, Bonded abrasive products一General requirements
3 Shapes and dimensions
NOTE 1 In all tables below, the “Designation” given in the first column is generated according to the following principle: Shape (= three letter code), D (mm), T (mm), and Sa (mm). For example, the designation for a spindle mounted wheel, shape WPL with D= 10 mm, T= 13 mm, and Sd= 6 mm the designation is“WPL 10 13 06”. As an exception, this rule can only be applied equivalently to 3.11, Table 11, because dimension T does not exist for the spherical shape.
NOTE 2 In all tables below, the former code is given in the second column for information only.
3.1 Wheel plain, Shape WPL
See Figure 1 and Table 1.
A complete designation of a bonded abrasive product in accordance with this part of ISO 603 shall consist of the following information:
a) designation of the bonded abrasive, Spindle mounted wheel;
b) reference to this part of ISO 603;
c) shape;
d) dimensions D, T, and Sd;
e) specification mark in accordance with ISO 525 and this part of ISO 603;
f) the maximum operating speed in accordance with ISO 525 and this part of ISO 603.
EXAMPLE A spindle mounted wheel, Type 52, Shape WPL (wheel plain), D = 13 mm, T = 20 mm, spindle diameter Sa= 6 mm, nature of abrasive A, grit size 80, grade M, nature of bond V and a maximum operating speed of 50 m/s is designated as follows:
Spindle mounted wheel ISO 603-17一WPL 13 20 06-A80MV- 50 m/s.BS ISO 603-17 pdf download.
