BS ISO 3116:2019 pdf free
BS ISO 3116:2019 pdf free.Magnesium and magnesium alloys一Wrought magnesium and magnesium alloys
The material shall be designated by symbols as given in Tables 1 to 47.
The designation for alloys shall consist of a prefix character “M”, which represents magnesium, and not more than three capital letters representing the alloying elements specified in the greatest amount,arranged in order of decreasing percentages, or in alphabetical order if of equal percentages, followed by the respective percentages rounded off to whole numbers and a serial letter in lower case.
The letters used to represent the alloying elements shall be those in Table 1. The third letter is used when the third largest amount of element is above or equal to 1 wt.%. If the third and fourth largest amount of elements are above or equal to 1, the higher amount of elements is taken; if of equal percentage, the third letter is decided by the producer who developed the alloy.
The chemical composition of wrought magnesium alloys, taken as cast analysis at the time the material is cast, shall conform to the requirements for the appropriate material given in Table 2.The minimum values of the mechanical properties of wrought products in magnesium alloys in the defined temper conditions shall be as given in Tables 3 to 48.Conditions for sampling, formation of batches and frequency of verification shall be subject to an agreement between the manufacturer and the purchaser.Test pieces shall be taken in the longitudinal direction. For rolled flat products of thickness > 0,6 mm,test pieces may be taken in the long transverse direction.
The number representing the result for any value specified in this document shall be expressed to the same number of decimal places as the corresponding number in this document. The rounding of numbers shall meet the requirements of ISO 80000-1:2009, B.3, rule A or B. The choice shall be left to the discretion of the manufacturer, unless the use of one of the rules is agreed by the time of acceptance of the order.BS ISO 3116 pdf free download.
