BS ISO 22917:2016 pdf free
BS ISO 22917:2016 pdf free.Precision superabrasives一Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
This International Standard applies to all rotating grinding precision tools with diamond or cubic boron nitride with metal, vitrified or resinoid bonded cores, and circular bores for mounting the grinding tool on a clamping flange as well as to grinding points with cylindrical spindle for mounting in collets. It contains the significant limit deviations and run-out tolerances of these grinding tools.
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 286-1, Geometrical product specifications (GPS)一ISO code system for tolerances on linear sizes一Part 1: Basis of tolerances, deviations and fits
ISO 286-2:2010, Geometrical product specifications (GPS)一ISO code system for tolerances on linear sizes一Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
The limit deviations of the outside diameter, TD, of the thickness, TT, of the depth of superabrasive section, Tx, and the circular run-out tolerance, axial, TRL, as specified in Table 19, apply to the respective ranges of nominal sizes of outside diameter, D, thickness, T, and depth of superabrasive section, X.
The limit deviations of the spindle diameter, Tsa, as specified in Table 20, correspond to the tolerance zone g6 in accordance with ISO 286-2:2010, Table 21, and apply to the respective ranges of diameters,Sd. The limit deviations of the reduced spindle, Ts1, apply to the respective range of diameter of the reduced spindle, S1.
The limit deviations of the outside diameter, TD, of the overall thickness, TT, the circular run-out tolerance, axial, TpL, and the circular run- out tolerance, radial, TRL, as specified in Table 23, apply to the respective ranges of nominal outside diameters, D.
The limit deviations of the bore diameter, TH, as specified in Table 24, correspond to the tolerance zone H7 in accordance with ISO 286-2:2010， Table 6, and apply to the respective ranges of bore diameters, H.BS ISO 22917 pdf free download.
