BS ISO 16463:2014 pdf free
BS ISO 16463:2014 pdf free.Polycristalline diamond inserts, tipped一Dimensions, types
BS ISO 16463 applies to inserts with insert shapes in accordance with ISO 883 and ISO 6987, tipped with polycrystalline diamond (DP).
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 513, Cassification and application of hard cutting materials for metal removal with defined cutting edges一Designation of the main groups and groups of application
ISO 883, Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole一Dimensions
ISO 1832, Indexable inserts for cutting tools一Designation
ISO 3365, Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole一Dimensions
ISO 6987, Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole一Dimensions
Triangular (T), square (S), rhombic 80° (C), 559 (D), and 35° (V) and trigon (W).
Normal clearance 5° (B), 7° (C). 11° (P), and 20° (E).
The designation of inserts tipped with polycrystalline diamond (DP) is based on ISO 1832. The letter symbol for the cutting edge condition and the letter symbol for the insert type shall be indicated in the designation in each case.
Designations contained in 4.2 and 4.3 are examples of use of designations in accordance with ISO 1832.
Designation of a tipped insert for turning
Designation of a rhombic insert with included angle εr= 55° (D), normal clearance an= 7° (C), with tolerance class G, without chip breakers and with fixing hole (W), with side lengthI= 11,6 mm (11), thickness s= 3,97 mm (T3), corner radius re= 0,8 mm (08), with sharp cutting edges (F), tipped一. one sided一one corner (A), long (L), cutting material in accordance with ISO 513 (e.g. DP05):
NOTE DP05 is optional in accordance with ISO 1832, designation symbol 13.
Designation of a tipped insert for milling
Designation of a square insert (S) with normal clearance 0n= 11° (P), with tolerance class G, without chip breakers and with fixing hole (W), with side lengthI= 12,7 mm (12), thickness s= 4,76 mm (04), cutting edge angle Kr= 75° (E), normal clearance at wiper edge a= 15° (D), right-hand type (R), tipped一
one sided一one corner (A), long (4), cutting material in accordance with ISO 513 (e.g. DP05).BS ISO 16463 pdf download.
