AS NZS CISPR 32:2015 pdf free

AS NZS CISPR 32:2015 pdf free.Electromagnetic compatibility of multimedia equipment – Emission requirements
This clause defines the measurement facilities and instrumentation specific to the measurement of emissions from MME; it includes by reference the relevant basic requirements given in the CISPR 16 series and other standards shown in the normative references in this standard. It also defines how to configure and arrange the EUT, local AE and associated cabling, and provides the relevant measurement procedures.
The specification of the measurement facility, measurement equipment, procedures, and the arrangement of the measurement equipment to be used are given in the basic standards referred to in the tables in Annex A. Unless otherwise specified, the basic standards shall be used for all aspects of the measurement.
Where there are conflicts in the information presented in the CISPR 16 series and this publication, the content of this publication takes precedence.
Modules intended to be marketed and/or sold separately from a host shall be assessed with at least one representative host system. The modules may be internal, mounted, plug-in or external as ilustrated in Figure 2. The port(s) of any module being assessed shall be terminated in accordance with Annex D. The functions of the host device that are specific to the module being assessed shall be exercised during the measurements. Modules shown to meet the requirements of this publication in any one representative host are deemed to meet the requirements of this publication when used in any host. The host and modules used during measurements shall be listed in the test report.
Where this publication gives options for measuring particular requirements with a choice of measurement methods, compliance can be shown against any of the specified limits using the appropriate measurement method. In any situation where it is necessary to re-measure the equipment to show compliance with this publication, the measurement method originally chosen shall be used in order to guarantee consistency of the results, unless it is agreed by the manufacturer to do otherwise. Requirements for radiated emission measurements are defined in Table A.2 to Table A.7 with the restrictions and limitations defined in Table A.1. Requirements for conducted emission measurements are defined in Table A.9 to Table A.13 with the restrictions defined in Table A.8.AS NZS CISPR 32 pdf free download.