AS 60601.2.24:2018 pdf free

AS 60601.2.24:2018 pdf free.Medical electrical equipment
In the IEC 60601 series, particular standards may modify, replace or delete requirements contained in the general standard and collateral standards as appropriate for the particular ME EQUIPMENT under consideration,and may add other BASIC SAFETY and ESSENTIAL PERFORMANCE requirements.
A requirement of a particular standard takes priority over the general standard.For brevity, IEC 60601-1 is referred to in this particular standard as the general standard.Collateral standards are referred to by their document number.
The numbering of clauses and subclauses of this particular standard corresponds to that of the general standard with the prefix “201″ (e.g.201.1 in this standard addresses the content of Clause 1 of the general standard) or applicable collateral standard with the prefix “20x” where X is the final digit(s) of the collateral standard document number (e.g. 202.4 in this particular standard addresses the content of Clause 4 of the 60601-1-2 collateral standard,203.4 in this particular standard addresses the content of Clause 4 of the 60601-1-3 collateral standard, etc.). The changes to the text of the general standard are specified by the use of the following words:
“Replacement” means that the clause or subclause of the general standard or applicable collateral standard is replaced completely by the text of this particular standard.Subclauses，figures or tables which are additional to those of the general standard are numbered starting from 201. 101. However, due to the fact that definitions in the general standard are numbered 3.1 through 3.139， additional definitions in this standard are numbered beginning from 201.3.201. Additional annexes are lettered AA,BB,etc., and additional items aa), bb), etc.
Where there is no corresponding clause or subclause in this particular standard, the clause or subclause of the general standard or applicable collateral standard, although possibly not relevant, applies without modification; where it is intended that any part of the general standard or applicable collateral standard, although possibly relevant, is not to be applied, a statement to that effect is given in this particular standard.AS 60601.2.24 pdf free download.