AS NZS 60598.2.5:2018 pdf free
AS NZS 60598.2.5:2018 pdf free.Luminaires – Part 2-5: Particular requirements – Floodlights
Lampholder brackets and lamp supports where used shall withstand normal usage throughout the life of the floodlight. They shall accept and retain lamps which are within the dimensional tolerances stated in the appropriate IEC publication where applicable, and locate the lamp or lamps in the designed relationship to the optical control devices in the floodlight.
Fixings which carry the weight of the floodlight and internal accessories shall be provided with appropriate means to prevent the dislodgement of any part of the floodlight by vibration, either in service or during maintenance.
Parts of floodlights for mounting heights of 3 m or higher which are fixed other than with at least two devices, for example, screws or equivalent means of sufficient strength, shall have such extra protection as to prevent those parts falling and endangering persons, animals and surroundings, if a fixing device fails under normal conditions. The points of attachment which allow the floodlight to rotate and which are tested below are excluded from the requirements of this paragraph.
For flat glass, the glass component is supported over the whole area to ensure that particles will not be scattered upon fragmentation and that movement of the particles is prevented.Shatter the glass with a centre punch at a point 30 mm from the mid-point of one of the longer edges of glass towards the centre.
NOTE 1 A centre punch is a tool made of steel with a sharp point.
For formed glass, the glass component part shall be supported on all the surfaces (example of testing method could be the use of material like sand or a mould). The thickness of the material used as a support surface shall be more than 30 mm. The face of the glass shall be completely covered with an adhesive film in order to avoid any movement of the broken particles. Shatter the glass (from the inside or the outside) with a centre punch in the middle of the glass cover.AS NZS 60598.2.5 pdf free download.
