Home>AS Standards>AS 3711.1:2015 pdf free

AS 3711.1:2015 pdf free

AS 3711.1:2015 pdf free.Freight containers Part 1: Classification, dimensions and ratings (ISO 668:2013, MOD)
The external dimensions and permissible tolerances given in Table 2 are applicable to all types of containers, except that a reduced height is permissible for tank, open top, bulk, platform and platform-based type containers.
The ratings given in Table 2 are applicable to all types of containers, except that for particular traffic higher values are permissible for 1 BBB, 1 BB, 1 B, 1 BX, 1 CC, 1 C and 1 CX containers of any type. Such containers are considered as ISO containers provided that their maximum gross mass (R) does not exceed 30 480 kg and that they are tested and marked to these ratings (see 3.3).
WARNING一Recognizing that there will always be a need for special containers for particular traffic, attention is drawn to the fact that numerous containers exist which have length and width dimensions similar to those of ISO series 1 containers but have ratings and/or heights in excess of those defined by this International Standard. This may include containers having maximum gross masses in excess of the ratings in Table 2. They may not, therefore, be fully intermodal worldwide and their operation could require special arrangements.
Closed-type containers designated 1A, 1B, 1C and 1D (types 00 and 02) shall have a door opening,preferably having dimensions equal to those of the internal cross-section (height and width) of the containers and, in any case, not less than the values given in Table 3.
Closed-type containers designated 1EE, 1AA, 1BB and 1CC (types 00 and 02) shall have a door opening,preferably having dimensions equal to those of the internal cross-section (height and width) of the containers and, in any case, not less than the values given in Table 3.
Closed-type containers designated 1EEE, 1AAA and 1BBB (types 00 and 02) shall have a door opening,preferably having dimensions equal to those of the internal cross-section (height and width) of the containers and, in any case, not less than the values given in Table 3.AS 3711.1 pdf free download.

Related standards