ISO 5053-2:2019 pdf free

ISO 5053-2:2019 pdf free.Industrial trucks – Vocabulary
This document establishes only the vocabulary of fork arms and load handling attachments.This document gives no safety requirements of fork arms and load handling attachments. For the purpose of this document, the term attachment describes a device that is mounted to an industrial truck to allow an alternative way to use the lifting system.
NOTE This document does not give any proposals as to which attachment can be appropriate for which load.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
一 ISO Online browsing platform: available at https://www.iso.org/obp
一IEC Electropedia: available at http://www.electropedia.org/
NOTE Due to the variance of the attachments and the on-going development of new combinations, it is not possible to illustrate all the different variations of attachments. Therefore, this document defines, shows and/or describes the typical variances.
blade cantilevered from a shank which is provided with means of attachment (e.g. bolted;shaft-mounted; hook-mounted) to a fork carrier and usually two or more fork arms are mounted together to handle, for example, palletized loads
Note 1 to entry: See Figure 1.
Note 2 to entry: For equivalent terms in German,Chinese and Italian, see A.1.
attachment mounted by the user or manufacturer onto an industrial truck fork carrier or fork arm,without requiring the disassembly of any other portion of the lifting system to install or remove,to allow an alternative way to use the lifting system and to return to standard configuration
Note 1 to entry: For equivalent terms in German,Chinese and Italian, see A.2.
device that is built into a lifting system of an industrial truck for use only in one application and changes have need of reference to the
industrial truck manufacturer
Note 1 to entry: For equivalent terms in German,Chinese and Italian, see A.3.
device added by the user or manufacturer onto an industrial truck fork arm(S) to allow an alternative way to use the lifting system and to return to standard configuration
Note 1 to entry: For equivalent terms in German,Chinese and Italian, see A.4.ISO 5053-2 pdf free download.